Xantrex Technology GT Series - Manual (Page 8)

Safety
vi 153553
This guide for use by qualified personnel only
Risks
WARNING: Shock hazard
Parts of the capacitor charge will still be energized for a maximum of five
minutes after being disconnected.
Open doors only after the device is disconnected and discharged. Check whether
the device is no longer live (DC voltage) including terminals TB3 and TB4.
WARNING: Amputation hazard
The inverters contain integrated ventilators including rotating ventilator wheels.
Do not place fingers in ventilator.
WARNING: Burn hazard
Inverters contain components that become hot during normal operation. Do not
touch.
CAUTION: Equipment Damage
Sensitive electronics inside the Inverter can be destroyed when touched and when
electrostatically charged. Discharge via earth potential before touching and wear
appropriate protective gear.
CAUTION: Equipment Damage
No connections or disconnections are to be made at the terminal strips or internal
connectors during operation.
Turn unit off before performing terminal work; wait five minutes (capacitor
charge) and recheck to ensure internal components are no longer live.
Ethernet.book Page vi Thursday, May 29, 2008 4:20 PM