Yamaha GX-90VCD - Manual (Page 48)

E-38
Automatic tape-editing
This convenient feature can be used to program tracks on a
disc (or discs) for recording to tape. By only memorizing the
tape’s total possible recording time, the unit will automatically
program tracks or help you to program tracks so they will fit
onto the tape with the least amount of unrecorded space
remaining at each end of the tape.
*
Tracks on a Video-CD cannot be programmed by this
method.
To record a disc with the order of tracks
unchanged
1
Press the CD input selector button and load a disc to be
recorded.
2
Select the disc by pressing the DISC SKIP button.
3
Load a tape into the deck 2 cassette compartment.
4
When recording with the Dolby NR system, press the
DOLBY NR button so that “
B” lights up on the display.
If not, turn it off.
*
For details, refer to the “Dolby B Type Noise
Reduction” on page 31.
5
If the reverse mode “ ” is not selected, press the
reverse MODE selector button to select it.
6
Press the TAPE button on the remote control transmitter
to select the length of the tape to be used. Whenever
pressed, C-46, C-54, C-60 and C-90 appear on the
display in turn, and next it returns to the normal display
mode.
When using tapes other than C-46, C-54, C-60 or C-90
When C-46, C-54, C-60 or C-90 is appearing on the
display, input the tape length by using the track number
input buttons on the remote control transmitter
(Examples)
C-62: Press “6” and then “2”.
C-30: Press “3” and then “0”, or press “+10” three times
and then “0”.
7
Press the EDIT button. (“EDIT” appears on the display.)
The following internal operations are carried out before
recording is automatically started.
* If the tape has not rewound to the end, it is rewound to
the end rapidly before recording starts.
1)Tracks on the disc are automatically divided between
side A and side B. You can check the process by
watching the display.
2)The end part of the tape on which recording cannot be
done is wound.
3)Disc playback and recording starts. Recording is carried
out on both side A and B of the tape.
(off) C-46 C-54 C-60 C-90
→ → → →
→
RECORDING CD/VIDEO-CD SOURCES
1 7 1
4 5 3
1 PLAYBACK 2 REC /PLAYBACK
EJECT
OPEN/CLOSE
DISC CHANGE MINI COMPONENT SYSTEM
GX–90VCD
1
2
3 DISC
PROGRAM
USER
VOLUME
MEMORY
REC/PAUSE MODE
HOUR MIN
NORMAL
DUBBING
HIGH
MEMORY
TIME ADJ
DOLBY NR
AUTO/MAN’L
TIMER
TIMER REC
MUSIC
POWER PHONES
A/B/C/D/E
RANDOM
REPEAT
EDIT
DISPLAY
CD
INPUT INPUT
TAPE 1/2
EJECT
Active Servo Technology MIC MIXING
PRESET/TUNING/BAND
VIDEO CD
Version 2.0 / Playback Control
ECHO ECHO
1
1
2
2
3
3
4
4
5
5
TIME
A
DISC SKIP
PROG
B
TAPE
C
EDIT
D
+ I0
E
OPEN/CLOSE INDEX MODE
6
6
7
7
8
8
9 0
CD
PRESET
TUNER
TAPE
RETURN
STOP PLAY PLAY REC/PAUSE TAPE 1/2
MUSIC
TEST FLAT CENTER/REAR
/DELAY
PROGRAM USER
POWER
INPUT SLEEP
VOLUME
REPEAT
PREV NEXT SELECT
ECHO/KEY
LEVEL
6
6
7
2
1
1