Zanussi FX 1165 W - Manual (Page 12)

12
To start the selected programme, press the
START/PAUSE button; the corresponding light stops
flashing.
The WASHING pilot light illuminates.
The “door locked” light comes on to indicate that the
door is locked.
The machine starts operating.
8. At the end
of the programme
The machine stops automatically.
If the Rinse Hold option has been selected, the
phase light END and the “door locked” light are on to
indicate that the water must be emptied out before
opening the door.
To do this first turn the programme selector dial to “O”
and then to drain programme
or spin programme .
Reduce the spin speed by means of the relevant selector
dial to avoid any creasing in the laundry.
The door can only be opened after the relevant light has
gone out.
Turn the programme selector dial to “O” to switch the
machine off.
Remove the laundry from the drum and carefully check
that the drum is empty.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
START
PAUSE
132992390.qxd 4/29/03 2:32 PM Pagina 12