Zanussi FX 1165 W - Manual (Page 9)

9
Operating Sequence
Before the first wash, we recommend that you pour 2
litres of water into the main wash compartment
of
the detergent drawer in order to activate the ECO valve.
Then run a cotton cycle at 60°C, without any laundry in
the machine, to remove any manufacturing residue from
the drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 6 KG OF WHITE COTTON AT 95°C
Suppose you have 6 kg of heavy soiled laundry to wash.
It is white cotton and is suitable for high temperature
washing.
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment
. If you have
selected the PREWASH function, pour detergent into
the compartment marked
.
If required, pour fabric
softener into the compartment marked (the amount
used must not exceed the “MAX” mark in the drawer).
Close the drawer gently.
P0004
3. Select the required programme
Turn the programme selector dial to the programme.
The light of the START/PAUSE button starts to flash.
4. Select the spin speed or
option or
Turn the selector dial to the required position.
FX 1165W FX 1265W
FX 1365W FX 1465W
90
0
500
1400
70
0
90
0
500
1300
70
0
90
0
500
1200
70
0
90
0
500
1100
70
0
P0877 P0876
132992390.qxd 4/29/03 2:32 PM Pagina 9