Yamaha CLAVINOVA C L P - 3 8 0 - Manual (Page 61)

Internet Direct Connection (IDC)
CLP-380 Owner’s Manual 61
Basic Operation
This lets you confirm LAN connection environment, IP address acquisition status, Time acquisition status, and the field
strength (when using a USB wireless LAN adaptor; using DHCP) for the current connection.
Procedure
1.
Call up the Connection Information screen.
1-1
Hold down the [FILE/SONG SETTING] button, and press
the [REC] button.
1-2
Use the A [–][+] buttons.
If “Display” does not appear in the lower left of the screen, use the C [–][+]
buttons to call up “Display.”
2.
Call up the connection information.
Press the B [+ (YES)] button.
The connection information is not displayed, depending on the state of the connection, and
is indicated as “NoInfo.”
Calling Up the Connection Information
1
-1
1
-2
1
-1
2
B
D
NO YES
A
C
Wireless Execute?-->
NetworkSearch
B
D
NO YES
A
C
ConnectInf Execute?-->
Display
Connection Information screen
B
D
NO YES
A
C
ConnectInf Execute?-->
Display:Device=OK(Port)
If the connection information
extends beyond what can be
displayed in the screen, you can
press the D [+] button to move
toward the right in one-character
steps. Press the D [–] button to
move back to the left in one-
character steps.
TIP
Indication Meaning
Device = LAN connection environment
IP = IP address acquisition status
Time = Time acquisition status
Strength = Field strength (when using a USB wireless LAN adaptor;
using DHCP)