ZyXEL Communications 70 Series - Manual (Page 690)

ZyWALL 5/35/70 Series User’s Guide
Appendix D Setting up Your Computer’s IP Address 690
Note: Make sure you are logged in as the root administrator.
Using the K Desktop Environment (KDE)
Follow the steps below to configure your computer IP address using the KDE.
1 Click the Red Hat button (located on the bottom left corner), select System Setting and
click Network.
Figure 431 Red Hat 9.0: KDE: Network Configuration: Devices
2 Double-click on the profile of the network card you wish to configure. The Ethernet
Device General screen displays as shown.
Figure 432 Red Hat 9.0: KDE: Ethernet Device: General