Operating sequence, Load the laundry, Measure out the detergent – Zanussi U29428 ZWF 1637 W User Manual

Page 11: Measure out the fabric softener, Switch the machine on, Select the desired programme/ fabric, Select the temperature

Advertising
background image

11

Operating Sequence

Before the first wash, we recommend that you run a
cotton cycle at 95°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the main wash
compartment

of the dispenser drawer and start the

machine.

WASHING 5 KG OF WHITE COTTON AT 95°C

Suppose you have 5 kg of laundry to wash. It is white
cotton and is suitable for high temperature washing.

1. Load the laundry

Open the door.

Place the laundry in the drum, one item at a time,
shaking them out as much as possible.

Close the door.

2.Measure out the detergent

Pull out the dispenser drawer until it stops. Measure out
the amount of detergent required and pour it into the
main wash compartment

.

If you wish to carry out the prewash, pour detergent into
the appropriate compartment marked

.

3.Measure out the fabric

softener

If required, pour fabric softener into the compartment
marked ,

without exceeding the «MAX» mark.

Close the drawer gently.

C0065

C0064

P0004

4. Switch the machine on

Press the “On/Off” button to switch the machine on.
The display will show three flashing dashes or a flashing
zero. The light above the button will light up.

5. Select the desired programme/

fabric

Press the FABRICS button repeatedly, in order to select
the desired programme/fabric (Cottons or Cotton
Daily
). The relevant light will light up.

The lights relevant to the phases that form the
programme will light up.

The display will show the duration of the selected
programme, calculated on the basis of the maximum
load for each type of fabric. The “Start/Pause” button
light will start flashing.

If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
duration relevant to the maximum load. The duration
value will be gradually adjusted during the cycle.

6. Select the temperature

Press the “Temp.” button if you wish to select a
temperature value different from the one proposed by
the washing machine (select 95°C).

Wash

Rinses

Spin

Drain

Prewash

Cottons

Synthetics

Cotton Daily

Delicate

Wool /

Handwash

---

0

On/Off

132982860amended.2301.07.qxd 23/01/2007 12.14 Pagina 11

Advertising