Zanussi U29428 ZWF 1637 W - Manual (Page 12)

12
The relevant light will light up.
7. Select the spin speed or the
Rinse Hold option
Press the “Spin” button repeatedly, in order to select the
desired spin speed or the Rinse Hold option. The
relevant light will light up.
If you select the Rinse Hold option, the machine will
stop at the end of the programme with the water still in
the tub.
8. Select the desired options
If your laundry is heavily soiled, it may be advisable to
select the “Prewash”option.
If is heavily soiled and you wish to prolong the washing
time, select the “Intensive” option.
If your laundry is only slightly soiled, select the “Extra
Quick” option.
The relevant light illuminates.
9. Select the Super Rinse or
40°AA option
Extra
Quick
Prewash
Intensive
Spin
1600
1200
900
700
Rinse Hold
60°C
50°C
95°C
40°C
30°C
Temp.
If you wish the laundry to undergo an extra rinse, select
the “Super Rinse” option.
If your laundry is lightly or normally soiled and it is
necessary to prolong the washing time, select the “40°
AA” option.
The relevant light illuminates.
10. Select the “Delay”
Before you start the programme, if you wish the start
to be delayed, press the “Delay” button repeatedly, or
keep it pressed, to select the desired delay. The selected
delay time value (up to 23 hours) will appear on the
display for 3 seconds, then the duration of the
programme will appear again.
11. Start the programme
Press the “Start/Pause” button. The relevant light will
stop flashing and only the light relevant to the phase that
is in progress will remain lit.
If you have chosen a delayed start, the washing machine
will begin the countdown.
The display will show the duration of the programme or
the selected delay.
12. How to change an option or
a programme during its cycle
Before you make any change, you must pause the
machine by pressing the “Start/Pause” button.
Delay
Super
Rinse
40° AA
132982860amended.2301.07.qxd 23/01/2007 12.15 Pagina 12