Yamaha CC-50 - Manual (Page 13)

E-11
English
Speaker connection
Connect each speaker wire to the SPEAKERS terminals.
Cautions
•
Do not let the bare speaker wires touch each other as this
could damage the receiver and/or speakers.
•
When connecting the speakers to the unit, be sure to
connect the speaker wires properly. Do not mistake the
right channel for the left channel and the plus (+) terminal
for the minus (–) terminal.
• Do not connect these SPEAKERS terminals to speakers
other than the provided speaker system NX-S50.
System connection
•
Connect the red connector on the rear of CDX-S50 to the
red socket on the rear of RX-S50.
•
Connect the black connector on the rear of KXW-S70 to
the black socket.
How to disconnect the system connector
Grasp both sides of the connector to disconnect the
connector.
Connecting the AC supply lead
• After connecting the speakers and system connectors,
plug the AC supply lead into a convenient AC outlet.
• Unplug the AC supply lead from the AC outlet if the unit is
not to be used for a long period of time.
PREPARATION FOR USE
R L
(Black wire with white line
→
plus (+) terminal,
black wire
→
minus (–) terminal)
To an
AC outlet
RX-S50
CDX-S50
KXW-S70