Automix, Remote control, Other functions – Yamaha 006IPTO-F0 User Manual
Page 8
8
New Functions in DM1000 Version 2
DM1000 Version 2—Owner’s Manual
Automix
•
You can insert the mix parameters in a region specified in the Automix data.
→
•
Touching the faders can punch parameter values in and out if the corresponding OVER-
WRITE button is set to on (Touch Sence Edit In ALL ).
→
Remote Control
•
Cubase SX has been added as a target of the Remote layer.
→
•
The Joystick or the controls in the SELECTED CHANNEL section enable you to control Pro
Tools Surround Pan settings.
→
•
Yamaha’s proprietary Advanced DAW protocol has been added to Nuendo, Cubase SX, and
General DAW. This enables you to control these devices using the DM1000’s SELECTED
CHANNEL section. (Controllable functions vary depending on the DAW software and ver-
sion you are using.)
Other Functions
•
You can control the DM1000 from a connected Video Editor via the ESAM protocol.
→
•
You can set the Routing ST Pair Link so that the routing from paired channels to the Stereo
Bus is linked.
→
•
Some Operation Lock Safe parameters have been added.
→
•
You can remotely control a connected Yamaha AD8HR A/D converter.
→
•
You can assign the selected channels to a Fader or Mute group using the USER DEFINED
KEYS.
→
•
You can switch the windows of the included Studio Manager software application using the
USER DEFINED KEYS.
→