Yamaha DSP5D - Manual (Page 219)

PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section
219
Information shown
in the display
Function
menu
Global
functions
Output
functions
Input
functions
Appendices
F CONSOLE PASSWORD
This is a temporary password (maximum of eight char-
acters) that is separate from the system password. The
password you specify here is valid for the CONSOLE
LOCK button (
7 ). The method for setting or chang-
ing the password is the same as for the system
password.
Hint
The Console Password is cleared when the PM5D’s power is
turned off, and will return to the unset state (the box will indi-
cate “--FREE--”).
G CONSOLE LOCK
This button locks the console operations. If the con-
sole password has been set, clicking this button will
open the CONSOLE PASSWORD CHECK window,
where you will need to input the console password.
SYS/W.CLOCK function
Here you can select the word clock on which the PM5D
will operate. You can also view and edit settings for cards
installed in slots 1–4.
A MASTER CLOCK SELECT
As the master clock to use, you can select the internal
clock or an external clock input from a connector or
slot. This setting determines the sampling frequency at
which the PM5D will operate. You can select the fol-
lowing items.
6 7
Display Content
INT 96k
The PM5D’s internal clock
(sampling rate= 96 kHz)
INT 88.2k
The PM5D’s internal clock
(sampling rate= 88.2 kHz)
INT 48 k
The PM5D’s internal clock
(sampling rate= 48 kHz)
INT 44.1 k
The PM5D’s internal clock
(sampling rate= 44.1 kHz)
W.CLOCK IN
The word clock supplied from the rear panel
WORD CLOCK IN connector
CASCADE IN
The word clock supplied via the CASCADE
IN connector from another cascade-con-
nected PM5D
2TR IN D1
The clock data of the digital audio signal
supplied from 2TR IN DIGITAL connector 1
2TR IN D2
The clock data of the digital audio signal
supplied from 2TR IN DIGITAL connector 2
2TR IN D3
The clock data of the digital audio signal
supplied from 2TR IN DIGITAL connector 3
SLOT 1–4
The clock data of the digital audio signal
supplied via a digital I/O card in slot 1–4
(selectable in two-channel units)
WORD CLOCK screen
WORD CLOCK
2
1