Yamaha CRX-E300 - Manual (Page 23)

19
English
Before recording
When you record by using MDX-E300 or KX-E300, you
must first make the connections as shown in “Connecting
other components” on page 7. For details, refer to the
instructions supplied with the MDX-E300 or KX-E300. A
source from the component which is connected to the
AUX terminal component can be recorded on a tape or
MD.
Dubbing setting
There are four combinations of components. Once you
choose a certain mode, recording starts and ends
automatically in a certain way for each mode.
DUBBING
START DUBBING
MODE
1
2
1
Turn CRX-E300 and all the components connected to
it to stop mode.
2
Decide the combination of the components. Each
time you press DUBBING MODE, the mode will
change in the below order.
• Recording automatically starts from the beginning
of the tape. (By pressing DUBBING START, the
tape automatically rewinds to the beginning if it is
in the middle.)
• When the recording on side A finishes while a
track is being played back, the recording on side B
starts from the beginning of the same track.
• The sound is automatically faded out when it gets
close to the end of side B.
3
4
Record unit Play unit
D E
TAPE
DIRECTION
PRESET TUNER PRESET
MD CD TAPE
AUX
MD
REC/PAUSE
TAPE
REC/PAUSE
MODE
SLEEP DISPLAY
DUBBING START
• Recording automatically starts at the beginning of
the tape. (By pressing DUBBING START, the
tape automatically rewinds to the beginning if it is
in the middle.)
3
Press DUBBING START to start recording.
Note
• The displays 1–4 which include the component you have not
connected to CRX-E300 will be skipped.
To stop dubbing
Press &.
CD synchronized
recording
You can start and stop recording a CD on an MD or a tape
by pressing just one button.
1
Press CD.
2
Press MD REC/PAUSE to record on an MD or
TAPE REC/PAUSE to record on a tape.
3
Press ^ or the play button on the CD player.
When playback starts on the CD player, recording
starts automatically on MDX-E300 or KX-E300.
To stop recording
Press &.
• Playback stops on the CD player and the recording
component enters recording pause mode.
• When & is pressed on the recording component,
recording stops and recording standby mode is cleared.
Playback continues on the CD player.
Record unit Play unit
• Same as CD = TAPE
MD
REC/PAUSE TAPE
REC/PAUSE
^
&
CD
SYSTEM CONTROL
0108CRXE300(UCA).18-20.E 02.5.23, 5:10 PM 19