Using the k desktop environment (kde) – ZyXEL Communications P-660HW-D Series User Manual
Page 267
Advertising
P-660HW-D Series User’s Guide
Appendix D Setting up Your Computer’s IP Address
266
Note: Make sure you are logged in as the root administrator.
Using the K Desktop Environment (KDE)
Follow the steps below to configure your computer IP address using the KDE.
1 Click the Red Hat button (located on the bottom left corner), select System Setting and
click Network.
Figure 163 Red Hat 9.0: KDE: Network Configuration: Devices
2 Double-click on the profile of the network card you wish to configure. The Ethernet
Device General screen displays as shown.
Figure 164 Red Hat 9.0: KDE: Ethernet Device: General
Advertising