Xerox VO400E User Manual
Page 14
VIZIO VO400E User Manual
14
www.VIZIO.com
SET TOP BOX
Connecting Your Cable or Satellite Box
You have four options for connecting your cable or satellite box to your HDTV: HDMI, Component,
Composite, or Coax (RF). Based on your home theater configuration, you can decide which option is the
right one for you. Refer to your set-top box user manual for more information about the video output
requirements or consult your cable or satellite operator.
Using HDMI (Best)
Cable and Satellite Boxes that have a HDMI digital interface should be connected to the HDMI input of
the HDTV for optimal results.
Note: To maintain the display quality, use a VIZIO certified HDMI cable. Length is available up to 10
meters. See www.vizio.com or call 1-888-VIZIOCE (1-888-849-4623) for details.
1.
Turn off the power to the HDTV and HDTV Set-Top Box.
2.
Connect a HDMI cable to the HDMI output of your HDTV Set-Top Box and the other end to
the HDMI 1 input at the rear of the HDTV.
3.
Turn on the power to the HDTV and HDTV Set-Top Box.
4.
Select HDMI 1 using the INPUT button on the remote or side of the HDTV, or directly by
pressing the HDMI button on the Remote Control.
Note:
! The HDMI input on the LCD TV supports High-bandwidth Digital Content Protection (HDCP).
HDCP encrypts the transmission between the video source and the digital display for added
security and protection.
! If you are already using the HDMI1 input for another component, or you do not want to use the
HDMI1 input for the Set-Top Box, you can connect the Set-Top Box to another HDMI connection.
! Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.