Xerox DocuMate 272 - Manual (Page 34)

DocuMate 272 Scanner User’s Guide 29
Scanning
The Default One Touch Settings on Your Scanner
Based on the recommended install of PaperPort and the scanner
driver, your scanner is pre-configured to scan items for various
basic tasks, such as email or fax, then send the scanned image to
an appropriate, pre-selected Destination Application. The following
table shows these factory-default settings. You can change any of
these settings.
If PaperPort, OmniPage or One Touch OmniPage is not installed,
then the options for sending to word processing applications such
as Microsoft Word will not be available.
Button Name
Destination
Application
Preconfigured Settings
1 Scan PaperPort Black&White @ 200dpi Duplex
2 PDF PaperPort Black&White @ 200dpi Duplex
3 Print Printer Black&White @ 200dpi Simplex
4 eMail eMail
Application Black&White @ 200dpi Simplex
5 Fax Fax
Application
Black&White @ 200dpi Simplex
6 OCR Microsoft
Word Black&White @ 300dpi Duplex
7 Archive Transfer to
Storage
Black&White @ 300dpi Simplex
8 Custom Microsoft
Paint
Color @ 100dpi Simplex
9 Paint Microsoft
Paint Color @ 300dpi Simplex
NOTE: The default page size in each configuration is based on
the location selected in your Windows setup.
For example:
• If the Windows location is set to “United States”, the default
page size in each profile is based on the United States
standard page sizes such as 8.5”x11”.
• If the Windows location is set to “United Kingdom”, the default
page size in each profile is based on the ISO 216 standard
and the majority of the profiles will default to A4.
NOTE: The email application will default to the email program
specified in the internet options of Internet Explorer.