Yamaha CDC-98 - Manual (Page 11)

11
3
➀
Shows the program number for the track to be set next.
➁
Shows the selected disc and track number.
➂
Shows the total time of the tracks currently programmed, if
tracks are selected from one disc only.
➃
Shows only the numbers of programmed tracks.
* If “P-01” does not appear in the display after the PROG
button is pressed, press the TIME display mode-select
button.
* If the total time reaches 100 minutes or more, only the last
two-digits will be displayed for the three-digit number.
STOP
PROG
10
DIMMER TIME OPEN/CLOSE
PROG CLEAR
MODE 1 2 3
4 5 6
7 8 9 0
+
PLAY PAUSE
SEARCH STOP INDEX
OUTPUT LEVEL + –
RANDOM
SKIP
SYNCHRO
REPEAT
DISC SKIP
DISC
SCAN
3
2
4
5
1
DISC SKIP
PLAY
1
Stop the unit.
3
If necessary, select the desired disc.
4
Select the desired track.
5
When the programming is completed;
*Repeat step 3 and 4 to set more programs.
Display information during program play
➀
➁ ➂
➃
2
PROGRAM PLAY
You can enjoy listening to your favorite tracks selected from one or several discs in any desired order using programmed play.
* The use of the remote control transmitter is recommended for easier operations.