Yamaha REV100 - Manual (Page 10)

Edit Mode
6
3. Edit Mode
Each of the effects in the REV100 has several parameters. Three of the most effective parameters can be edited using the rotary
controls for quick, versatile, and simple operation.
Editing a Program
1. Press the and keys until the desired program number is displayed on the 7-segment LED.
2. Select one of the Edit controls, for example, the DELAY rotary control.
3. Rotate the control. The value on the 7-segment LED changes to reflect the adjustment you are making to the parameter.
When the parameter value you are editing matches the preset value, the LED beside the control lights up:
4. Listen to the modified effect.
The following table lists the values that you can edit with the front panel controls:
Storing a Program
1. Press the STORE key. The program number will flash on the 7-segment LED.
2. Press the STORE key again to confirm the operation.
Note that you cannot select a different program number to store your changes in.
Initializing the REV100
The following procedure is used to initialize the programs 1 to 99 (one selected program or all the programs) to the factory default
condition:
1. Turn on the power to the REV100 while holding down the STORE key.
2. Press the and keys to select the program number you wish to initialize.
When the 7-segment LED displays “ ”, all the programs 1 to 99 will be initialized.
3. Press the STORE key to execute the initialization.
No. Effect Type Delay Decay Level
1 - 20 REVERB Pre Delay (msec) Reverb Time (
×
0.1sec) Effect Level
21 - 40 STEREO REVERB Pre Delay (msec) Reverb Time (
×
0.1sec) Effect Level
41 - 50 GATE REVERB Pre Delay (msec) Noise Gate Level Effect Level
51 - 60 DELAY Delay Time (
×
10msec) Feedback Level Effect Level
61 - 70 DELAY/REVERB Delay Time (
×
10msec) Feedback Level Reverb Level
71 - 99 REVERB/MODULATION Modulation Depth Modulation Speed Reverb Level
DELAY
MIN MAX
DECAY
MIN MAX
LEVEL
MIN MAX
MIDI INT