Yamaha REV100 - Manual (Page 25)

Mode MIDI
9
La valeur 00H de la commande de contrôle sélectionne chaque fois la valeur minimale du paramètre
La valeur 7FH de la commande de contrôle sélectionne chaque fois la valeur maximale du paramètre
Si vous désirez profiter du format des messages System Exclusive pour le REV100, veuillez contacter votre revendeur Yamaha.
REVERB/
MODULATION
Flanger
Modulation Depth 20
Modulation Speed 21
Reverb Level 22
Reverb Time 23
Reverb High Damp 24
Resonance 25
Filter Type (LPF/HPF) 26
Cut-off Frequency 27
Chorus +
Symphonic
Modulation Depth 20
Modulation Speed 21
Reverb Level 22
Reverb Time 23
Reverb High Damp 24
Filter Type (LPF/HPF) 25
Cut-off Frequency 26
Tremolo
Modulation Depth 20
Modulation Speed 21
Reverb Level 22
Reverb Time 23
Reverb High Damp 24
Phase 25
Filter Type (LPF/HPF) 26
Cut-off Frequency 27
Type d’effet Nom du paramètre Contrôle no.
MIDI Data Format
Reception format
Progaram Change
status 1100 nnnn(CnH)nnnn = channel No. * 1
1st data 0ppp pppp ppppppp = program No. * 2
Control Change
You can control the parameters using Control Change mes-
sages. Refer to page 8 “Real time parameter change” for the
Control numbers.
status 1011 nnnn(BnH) nnnn = channel No. * 1
1st data 000c cccc ccccc = control No. * 3
2nd data 0vvv vvvv vvvvvvv = control Value
*4
Parameter Change
status 1111 0000(Foh) System exclusive
ID No. 0100 0011(43h) YAMAHA
substatus 0001 nnnn nnnn = channel No. * 1
group No. 0001 1110(1Eh) PA group
device code 0000 0004(04h) REV100
parameter No. 0000 pppp parameter No. * 5
0000 pppp
data 0000 aaaa 1st byte * 6
0000 bbbb 2nd byte
EOX 1111 0111(F7h) End of exclusive
*1 nnnn = 0 (channel 1) –15 (channel 16)
*2 ppppppp = 0 (program 1) – 98 (program 99)
Program numbers after 99 will be ignored.
*3 ccccc = 20 – 27 Depends on the effect type. (See page 8)
*4 vvvvvvv = 0 – 127
*5, *6 Depends on the effect type and parameter.
(Please consult your local Yamaha Sales Centre.)