Yamaha RX-SL100RDS - Manual (Page 40)

SET MENU
38
You can use the following parameters to adjust a variety of system settings and customize the way this unit operates.
Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.
■ BASIC menu
Use to quickly setup basic system parameters (see page 16).
■ SOUND menu
Use to manually adjust any speaker setting.
y
Most of the parameters described in the SOUND menu are set automatically when you perform the BASIC settings (see page 16).
■ INPUT menu
Use to reassign digital input/outputs or select the input mode.
■ OPTION menu
Use to adjust the optional system settings.
*a : TUNER Freq/Step is only available for Asia and General models.
*b : Standby SCART is only available for the Europe model.
SET MENU
Item Features Page
Center SP. GEQ Adjusts the frequency. 40
SP Tone Control Adjusts the tonal balance of the speakers. 40
HP Tone Control Adjusts the tonal balance of the headphones. 40
Speaker Set
Selects the output mode suitable for each speaker, the speakers for low-frequency signal output,
and the cross over frequency.
41
SP Distance Adjusts the delay time of each speaker. 42
LFE Level Adjusts the output level of the LFE channel for Dolby Digital or DTS signals. 42
Dynamic Range Adjusts the dynamic range for Dolby Digital or DTS signals. 42
Item Features Page
Input Assign Assigns jacks according to the component to be used. 43
Input Mode Selects the initial input mode of the source. 44
Item Features Page
Display Dimmer Adjusts the overall brightness of the front panel display. 45
Memory Guard Locks sound field program parameters and other SET MENU settings. 45
Audio Mute Adjusts the muting level for audio sources. 45
TUNER Freq/Step Switches frequency spacing. *a 45
Standby SCART Turns on this unit when a component connected using a SCART cable is turned on. *b 45
01EN.00_RX-SL100RDS.book Page 38 Thursday, November 27, 2003 12:42 PM