Graphic arc – Xerox 4213 User Manual
Page 133
Advertising
XES COMMAND LANGUAGE MODE
Figure 2-27.
A graphic line drawn inside a graphic window
Graphic Arc
Purpose
Draws arcs and circles within the graphic window (figure 2-28).
Syntax
E
gaT;X,Y,r,S1,E1,Sn,En
L
ga
The instruction for a graphic arc.
T
Line thickness of the figure. This number can not
exceed one half the radius.
;
The semicolon is required. If omitted, the
command is ignored. Commas separate the other
variables.
X,Y
The coordinates for the centre of the arc. X is the
horizontal distance from the left edge of the
graphic window to the centre point. Y is the
vertical distance from the top edge of the graphic
window to the centre point.
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
2-95
Advertising