Xerox 4213 - Manual (Page 199)

LJ SERIES 2D EMULATION
Syntax
E (s#H
where # is a real number valid up to two decimal places.
The Pitch command for the secondary font is:
E )s#H
Example To set the primary font as 12-pitch and the secondary font as 10-
pitch, enter:
E
(s12H
Hex 1B 28 73 31 32 48
Dec 27 40 115 49 50 72
The Pitch command for the secondary font is as follows:
Syntax
E )s10H
Hex 1B 29 31 30 48
Dec 27 41 49 48 72
Height
Purpose The Height command selects the character height of the font in
points (72nds of an inch). There are separate commands to
select height for the primary and secondary fonts. If the selected
height is unavailable, the closest match is used. Fonts within a
quarter of a point of the requested height are seen by the printer
as identical selections.
Syntax
E (s#V
where # is the selected height in points up to two decimal
places.
The Height command for the secondary font is:
E )s#V
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 3-39