Xerox 8500/8550 User Manual
Page 137
Phaser® 8500/8550 Color Printer
A-4
Moving the Printer
Follow these guidelines to avoid injuring yourself or damaging the printer:
■
Keep the printer level. Tilting the printer can cause the ink to spill inside.
■
Use the
Shut Down for Moving Printer
mode on the control panel for best results.
■
Always allow the printer to cool before it is moved to avoid ink spills that can damage the
printer.
Warning:
Parts of the printer may be hot. To avid personal injury or damage to the
printer, allow 30 minutes for it to cool down before moving or packing the printer. This
allows the ink to solidify.
■
Always turn off the printer using the power switch, located under the interface cover on
the right side of the printer. Unplug all cables and cords. Never turn off the printer by
pulling the power cord or using a power-strip with an on/off switch.
8500-030