Xerox DocuPrint NC60 - Manual (Page 34)

Tray Menu
1-28 ❖ DocuPrint NC60 System Administrator Guide
Tray Sequence
Define the order in which trays
are used when more than one
tray meets the size and type
requirements.
The available values are:
1-2
2-1
Off*
Tray switching is only available
when the optional Tray 2 is
installed.
The first tray of a sequence is
used until it runs out of paper, at
which time the next tray in the
sequence is used (if it has the
correct paper size and type).
1. Press Menu Up or Menu Down
until you see:
Menus
Tray Menu
2. Press Item Up or Item Down until
you see:
Tray Menu
Tray Sequence
3. Press Value Up or Value Down until
you see:
Tray Sequence =
New Value
4. Press Enter. You will see: Tray Menu
Tray Sequence
5. Press Online. You will see: Ready
Table 1.8 Tray Menu functions (continued)
Menu Item and Function Keystrokes Display Reads
Table 1.8 Page 3 of 3