Xerox DocuPrint NC60 - Manual (Page 58)

Parallel Menu
1-52 ❖ DocuPrint NC60 System Administrator Guide
Parallel PDL
Set the default emulation for the
parallel port.
The available values are:
Auto*
PCL
PostScript
1. Press Menu Up or Menu
Down until you see:
Menus
Parallel Menu
2. Press Item Up or Item Down
until you see:
Parallel Menu
Parallel PDL
3. Press Value Up or Value Down
until you see:
Parallel PDL =
New Value
4. Press Enter. You will see: Parallel Menu
Parallel PDL
5. Press Online. You will see: Ready
Binary PS
Enable or disable the binary mode of
PostScript.
The available values are:
On
Off*
1. Press Menu Up or Menu
Down until you see:
Menus
Parallel Menu
2. Press Item Up or Item Down
until you see:
Parallel Menu
Binary PS
3. Press Value Up or Value Down
until you see:
Binary PS =
New Value
4. Press Enter. You will see: Parallel Menu
Binary PS
5. Press Online. You will see: Ready
Bidirectional
Enable or disable bidirectional
communications through the parallel
port.
The available values are:
On*
Off
1. Press Menu Up or Menu
Down until you see:
Menus
Parallel Menu
2. Press Item Up or Item Down
until you see:
Parallel Menu
Bidirectional
3. Press Value Up or Value Down
until you see:
Bidirectional =
New Value
4. Press Enter. You will see: Parallel Menu
Bidirectional
5. Press Online. You will see: Ready
Table 1.13 Parallel Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.13 Page 2 of 2