3Com 3CRWDR200A-75 - Manual (Page 38)

38 C HAPTER 4: R UNNING THE S ETUP W IZARD
PPPoA Mode
Figure 18 The PPPoA Screen
To setup the Router for use with a PPPoA connection:
1 Enter your PPP over ATM user name in the PPP User Name text box.
2 Enter your PPP over ATM password in the PPP Password text box.
3 Select Dial on Demand if you want the internet connection dropped
when there is no activities with the Internet. Enter an idle time from the
Maximum Idle Time drop down list. This is the amount of time without
Internet activity that you want to allow before the Router ends the PPPoE
session.
4 Manual IP Address/DNS Server configuration: Enter the IP Address that
you would like to be assigned to the router’s WAN interface if you have
required one from your ISP. And enter the DNS Server’s IP Address if it is
given by your ISP(optional).
5 Check all of your settings, and then click Next.
VPI/VCI: VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier)
define an ATM PVC(Permanent Virtual Circuit). Please obtain these values
from your ISP.