3Com 3CRWDR200A-75 - Manual (Page 56)

56 C HAPTER 5: R OUTER C ONFIGURATION
Click Save to save the setting.
WPA
To enable WPA, select WPA-PSK or WPA2-PSK from the Encryption
Type.
Figure 34 Encryption — WPA
1 Select either TKIP or AES as the Encryption Method.
2 Enter a passphrase between 8 to 63 characters long for the Pre-Shared
Key.
3 Enter the desired key renewal time in seconds for WPA Group Rekey
Interval.
Click Save to save the setting.
WPA with RADIUS
If you are using a RADIUS server in your network for authentication, you
may choose WPA or WPA2+ Radius from the Encryption Type.