3Com 3C840 - Manual (Page 209)

Default Bridge Mode 5 - 10
for remote site connections 5 - 4
for the LAN 5 - 3
introduction 5 - 1
MAC-Encapsulated Routing 5 - 6
monitoring 5 - 11
testing 5 - 11
configuring bridging for the LAN
adding a bridge network 5 - 3
deleting a bridge network 5 - 4
modifying a bridge network 5 - 4
configuring IP RIP on the LAN
advanced RIP configuration options 4 - 5
local site (LAN) RIP 4 - 5
configuring IP routing
adding a local IP network 4 - 3
configuring IP for the remote site connection 4 - 7
configuring IP RIP on a remote site 4 - 10
configuring IP static and framed routes 4 - 11
deleting a local IP network 4 - 4
enabling 4 - 2
introduction 4 - 1
IP address
validation 4 - 12
IP RIP configuration on the LAN 4 - 5
IP testing (PING) 4 - 14
modifying a local IP network 4 - 4
monitoring 4 - 14
configuring IP static and framed routes
adding a framed IP route to a remote site 4 - 11
adding a static IP route to the LAN 4 - 11
configuring IPX RIP and SAP
local site (LAN) RIP and SAP 9 - 10
remote site RIP and SAP 9 - 11
configuring IPX static and framed routes
adding framed IPX route to a remote site 9 - 6
adding static IPX route to the local site 9 - 5
configuring IPX static and framed services
adding a framed IPX service to a remote site 9 - 9
adding a static IPX service to a local site 9 - 8
connection
event log 11 - 16
traffic/error counters 11 - 7
controlling
SNMP access 2 - 4
TFTP access 2 - 6
controlling login and Telnet access 2 - 1
adding a login 2 - 2
deleting a login 2 - 2
conventions 2
notice icons, About This Guide 2
text, About This Guide 3
counters
840ug.book Page 3 Friday, July 7, 2000 2:23 PM