1 leds, 2 ports, 3 optical bypass connector – 3Com COREBUILDER 5000 User Manual

Page 13

Advertising
background image

C

ORE

B

UILDER

®

5000 S

WITCH

M

ODULE

Q

UICK

S

TART

AND

R

EFERENCE

13

14.0

Mixed Technology SwitchModule
Front Panel Features

This section describes the Fiber Distributed Date Interface
(FDDI) ports and LEDs on the front panel of the following
SwitchModules:

10BASE-T and FDDI Mixed Technology SwitchModule

10BASE-FB/FL and FDDI Mixed Technology
SwitchModule

Section 11.0, "10BASE-T SwitchModule Front Panel
Features"
, and Section 13.0, "10BASE-FB/FL
SwitchModule Front Panel Features" des
cribe the
10BASE-T and 10BASE-FB/FL ports, respectively. Section
10.0, "Common Front Panel Features"
describes the
PacketChannel and Module Status LEDs, and Reset button.

14.1 LEDs

FDDI LEDs are green only (not yellow). The following table
explains the FDDI port status LED blink sequences and the
10BASE-T and 10BASE-FB/FL port status or activity LED
blink sequences:

LED State

Indicates

FDDI Port

Green On Port is enabled and ring is

operational.

Green
Blinking

Port is connecting.

Off

Port or port functions are
disabled.

10BASE-T Port

Green On Port is enabled and link is OK.

Green
Blinking

Link failure or waiting for
network connection.

Off

Port or port functions are
disabled.

Yellow
On

Heavy port traffic activity.

Yellow
Blinking

Normal port traffic activity.

10BASE-FB/FL Port Green On Port is enabled and link is OK.

Green
1 Blink

No light on receive fiber.

Green
2 Blinks

Port received jabber.

Green
3 Blinks

Port is partitioned.

Green
4 Blinks

Remote fault.

Off

Port or port functions are
disabled.

Yellow
On

Heavy port traffic activity.

Yellow
Blinking

Normal port traffic activity.

14.2 Ports

FDDI ports on mixed technology SwitchModules are Dual
Attach Station (DAS) (A/B) ports that use MIC connectors.

14.3 Optical Bypass Connector

FDDI SwitchModules support one optical bypass connector
per DAS port. Use the optical bypass connector to preserve
a dual FDDI ring in the event of a station failure. The
optical bypass connector accepts an optical bypass switch
of type AMP FOTP-34 Method B using a mini-DIN
connector.

6614M-FTP-A

10BASE-T and FDDI

SwitchModule

Model Number

3C96614M-FTP-A

6612M-FF-A

10BASE-FB/FL and FDDI

SwitchModule

Model Number

3C96612M-FF-A

OPTICAL

BYPASS

A

B

OPTICAL

BYPASS

A

B

B

A

B

A

MIC
connectors

FDDI Port Status
LEDs

Advertising