0 fast ethernet switchmodule front panel features, 1 leds, 2 ports – 3Com COREBUILDER 5000 User Manual

Page 15

Advertising
background image

15

16.0

Fast Ethernet SwitchModule Front
Panel Features

This section describes the front panel features that are
unique to the Fast Ethernet SwitchModules. See
Section 10.0 for a description of the PacketChannel LED,
Module Status LED, and the Reset button.

16.1 LEDs

The following table explains the Fast Ethernet port status
or activity LED blink sequences:

16.2 Ports

The 100BASE-TX SwitchModule uses crossover ports with
RJ-45 connectors. The X that follows the port number on
the SwitchModule indicates a crossover port.

CoreBuilder 5000 100BASE-T modules use crossover
ports. This means that if you connect a 100BASE-T
SwitchModule port to another CoreBuilder 5000
100BASE-T module port, you must use a crossover
cable.

LED State

Indicates

Port Status or
Activity

(One per Port)

Green On

Port is enabled and link is OK.

Green
1 Blink

Link failure.

Green
4 Blinks

Remote link failure.

Off

Port or port functions are
disabled.

Yellow On

Heavy traffic activity on the port.

Yellow
Blinking

Normal traffic activity on the
port.

Full-Duplex

(Not found on
the 6618M-TX)

Green On

Port is in full duplex mode.

Green
Blinking

Autonegotiation is determining
the correct duplex setting.

Off

Port is in half-duplex mode.

Copyright © 3Com Corporation, 2000. All rights reserved.
3Com, the 3Com logo, CoreBuilder, PACE, and Transcend are registered trademarks of 3Com Corporation.
ONline and TriChannel are trademarks of 3Com Corporation.
Windows is a registered trademark of Microsoft Corporation.
UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company, Ltd.
All other company and product names may be trademarks of the companies with which they are associated.

The 100BASE-FX SwitchModule uses SC connectors. See
the following figures.

6604M-TX-A

4X

3X

2X

1X

STATUS

1

2

3

4

FULL DPLX

RJ-45

connectors

Port Status/Activity and

Full-Duplex Status LEDs

1

2

3

4

RX

TX

RX

TX

RX

TX

RX

TX

6604M-FX-A

STATUS

FULL DPLX

1

2

3

4

SC

connectors

100BASE-TX

SwitchModule

Model Number

3C96604M-TX-A

100BASE-FX

SwitchModule

Model Number

3C96604M-FX-A

100BASE-TX

SwitchModule

Model Number
3C96618M-TX

PACKETCHANNEL
MOD ST

AT

RESET

2.2

2.4
3.2
3.4

1.2
1.4
1.6

4.2
4.4

2.1

2.3
3.1
3.3

1.1
1.3
1.5

4.1
4.3

1.1X

1.2X

1.3X

1.4X

1.5X

1.6X

2.1X

2.2X

2.3X

2.4X

3.1X

3.2X

3.3X

3.4X

4.1X

4.2X

4.3X

4.4X

6618M-TX-A

Advertising