Arcam AVR360 - Manual (Page 9)

e-9
english
NOTE
Please read the ‘Placing the unit’, ‘Power’ and
‘Interconnect cables’ sections on page E-7 before
connecting up your AVr360 integrated amplifier!
rear panel
connectors
HdMi
For information, see page E-10.
Speaker connectors
For information, see page E-19.
Power inlet
Connect the correct mains
cable here. The AVr360 is
configured for 220V—240V
50Hz power only.
Video connectors
Component, S-Video and Composite connectors,
see page E-11.
Zone 2 connection, see page E-11.
digital connectors
Optical and electrical digital
audio connectors, seepage E-11.
audio connectors
Two-channel and multi-
channel, see page E-12.
Preamplifier output
See page E-12
aerials, control and communication
FM/AM/DAB radio, drDock/irDock, rS232,
network/USB, Ir and trigger connectors,
see page E-16, page E-17.