2Wire 2701HGV-W User Manual

Page 11

Advertising
background image

Connect the First Computer to the Gateway

8

Install the 2Wire Gateway USB Driver - Windows

1.

Power on your computer and place the 2Wire CD in your computer’s CD-ROM drive.

2.

If the Add Hardware Wizard displays, follow the on-screen instructions. If prompted to identify where to
search for drivers, deselect

Floppy Disk drive

and check

CD-ROM drive

.

3.

After the driver installs click

Finish

to complete the driver installation. The Setup Wizard will resume

when your PC has rebooted.

Install the 2Wire Gateway USB Driver - Macintosh

Before making your USB connection to the gateway, you must install the 2Wire gateway USB driver on your
computer. The following instructions are for USB installation on Macintosh computers running OS 10.2.

1.

Power on your computer and place the 2Wire CD in your computer’s CD-ROM drive.

2.

Double-click the 2Wire CD icon on your desktop.

3.

Double-click 2Wire USB to begin the driver installation.

4.

If you have set up an administrator name and password, the Authenticate screen opens. Enter your
administrator name and password and click

OK

.

5.

Follow the on-screen instructions. When the driver installation is complete, you will be prompted to
restart your computer.

6.

After your computer restarts, connect the provided blue USB cable from the

USB-PC

port on the 2Wire

gateway to your computer’s

USB

port.

Check Your Connections

With your computer completely started, verify the

POWER

and

USB-PC

indicator lights on the front of the

2Wire gateway are green. If they are not, see “Understanding the Indicator Lights” on page 18. The

INTERNET

indicator light will not turn green until the gateway software has been installed and an Internet

connection has been established.

Note:

Microsoft Windows 98 users may be prompted to insert the Windows 98 installation

CD-ROM after installing the 2Wire gateway USB drivers. After the Windows 98 updates are
complete, remove the Windows 98 CD and reinsert the 2Wire CD into your CD-ROM prior to
rebooting your PC.

Note:

The 2Wire gateway supports USB for Macintosh OS 8.6, 9.2, 10.1.4, 10.1.5, 10.2.0,

10.2.1 to 10.2.6, 10.3.3 to 10.3.9, 10.4.0, and 10.4.1.

Advertising