3M MicroTouch M170 - Manual (Page 23)

Chapter 2 Setting Up Your M170 FPD Monitor 23
Calibrating the Touch Screen
After you connect your touch monitor and install TouchWare™ software, you must
calibrate the touch screen. Calibration serves two purposes:
• Sets the active area of the touch screen
• Aligns the touch screen’s active area to the underlying video
To calibrate the touch screen, open the touch screen control panel and select Calibrate.
Follow the directions displayed on the screen. For more information on calibration, refer
to the online help or the user documentation.
3M Touch Systems Proprietary Information