Festool SRM 45 E-LHS 225 PLANEX - Manual (Page 17)

17
12 Warranty
For our tools, we give warranty for material and
production defects in accordance with the locally
applicable legal provisions, but in any case for at
least 12 months. Within the EU member states,
the warranty period is 24 months (verification
through invoice or delivery note). Damage caused
by the operator, natural wear, overloading, incor-
rect handling or through the use of the equipment
not specifi ed in the operating manual, or damage
which was known at the time of purchase, is not
covered by the warranty. Furthermore, damage
caused by the use of non-original Festool accesso-
ries and consumable material (e.g. sanding pads)
is also excluded. Complaints can only be recog-
nised if the tool is returned while still assembled
to the supplier or an authorised Festool Customer
Service workshop. Keep the operating manual,
safety instructions, spare parts list and purchase
receipt in a safe place. Otherwise the respective,
current warranty conditions of the manufacturer
shall apply.
Note
Due to continuous research and development work,
we reserve the right to make changes to the techni-
cal content of this documentation.
13 EU Declaration of Conformity
Mobile dust extractor Serial no.
SRM 45 E-LHS 225 495079, 495080,
495081, 495082, 495499
Mobile dust extractor Serial no.
Year of CE mark: 2007
We solely declare that this product conforms with
the following standards and normative documents:
EN 60335-1, EN 60335-2-69, EN 55014-1, EN
55014-2, EN 61000-3-2, EN 61000-3-3 in accord-
ance with the regulations in Directives 2006/95/
EC (until 28 Dec. 2009), 2006/42/EC (from 29 Dec.
2009), 2004/108/EC.
Dr. Johannes Steimel
Head of Research, Development and Technical
Documentation
Festool GmbH
Wertstraße 20
D-73240 Wendlingen
REACH for Festool products, their accessories
and consumables
REACh is a European Chemical Directive that
came into effect in 2007. As “downstream users”
and product manufacturers, we are aware of our
duty to provide our customers with information.
We have set up the following website to keep you
updated with all the latest news and provide you
with information on all the materials used in our
existing products: www.festool.com/reach
14 Troubleshooting
Problem Possible causes Remedy
Extractor blows out
dust. Dust entered the area around the
fi lter element retainer when the fi l-
ter element was changed. Clean the fi lter element retainer.
The fi lter element is not installed
correctly / faulty. Check that the fi lter element is installed cor-
rectly if necessary.
Acoustic warning
signal sounds. Suction power setting too low. Adjust the suction power to a higher setting.
Hose diameter setting does not
match the diameter of the connec-
ted suction hose. Select the correct the suction hose diameter
(for
PLANEX use D = 36 mm).
Suction hose blocked or kinked. Remove blockage and straighten hose.
Disposal bag full Replace disposal bag.
You are working with the RTS/RS
400, DTS/DS 400, ETS/ES 125. Please use the adapter with bypass function:
part no. 496112.