Festool DF 700 EQ - Manual (Page 17)

DF 700 EQ
17
GB
11 Accessories
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festool.com".
Festool provides comprehensive accessories which
allow you to use your machine effectively and for di-
verse applications, e.g.:
• Handrail fence RA-DF 500/700
• Cross stop QA-DF 500/700
• Stopper LA-DF 500/700
Assembly instructions are included at the end of
the operating manual.
12 Environment
Do not throw the power tool in your household
waste! Dispose of machines, accessories and pack-
aging at an environmentally responsible recycling
centre. Observe the valid national regulations.
EU only: European Directive 2002/96/EC stipulates
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
Information on REACh: www.festool.com/reach
13 EU Declaration of Conformity
We declare under sole responsibility that this prod-
uct complies with the following directives and stan-
dards:
2006/42/EG, 2004/108/EG, 2011/65/EU, EN 60745-
1, EN 60745-2-19, EN 55014-1, EN 55014-2, EN
61000-3-2, EN 61000-3-3.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical
Documentation
21.02.2013
Tool cannot be loosened during
tool change Spindle lock not functioning Twist spindle against the tool using
an open-ended spanner. If this
occurs several times contact the
after-sales service department.
The positions of the dowel holes
which are created with one of the
left and one of the right stop pins
do not match precisely. The stop pins are selected differ-
ent on the right and left. Select the same stop pins on the
left and the right.
DOMINO joining machine oper-
ates irregularly, jerks a. No dust extractor connected
b. Rubber buffer [1-1] worn a. Connect dust extractor
b. Replace rubber buffer (spare
part)
Fault Cause Solution
Dowel jointer Serial no.
DF 700 EQ 499247
Year of CE mark: 2011