Festool CTH 26 E-AC CLEANTEX - Manual (Page 20)

20
CTH GB
 Insert the retainer [9-2]with the main filter and
fold over the lever [9-4] until it engages in posi-
tion.
 Tighten the safety screws[9-3].
 Replace the top section [2-1] and close the
locking clips [2-2].
9.2 Emptying the dust container
The dust container [2-3] can be emptied once the
top section has been removed.
 After extracting fluids, clean the fill level sen-
sors [10-1] regularly with a soft cloth and in-
spect for damage.
10 Accessories
The order numbers for the accessories and filters
can be found in the Festool catalogue or on the In-
ternet at "www.festool.com".
10.1 Modules
The following modules for upgrading the mobile
dust extractor are available in the accessories pro-
gramme. Modules must be fitted to the module slot
[1-3] by an authorised service workshop:
– Compressed air module,
– Socket module with permanent power supply,
– Socket module with automatic switch-on unit
(not suitable for GB 110 V version),
– Energy box module (EAA) for using the automatic
switch-on unit on the EAA.
You can find more detailed information on the mod-
ules at "www.festool.com".
11 Environment
Do not dispose of the device in house-
hold waste! Recycle devices, accesso-
ries and packaging. Observe applica-
ble country-specific regulations.
EU only: European Directive 2002/96/EC stipulates
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
Information on REACh:www.festool.com/reach
12 EU Declaration of Conformity
We declare under sole responsibility that this prod-
uct complies with all the relevant requirements in
the following Directives, standards and normative
documents:
2006/42/EC, 2004/108/EC, 2011/65/EU, EN 60335-
1, EN 60335-2-69, EN 55014-1, EN 55014-2, EN
61000-3-2, EN 61000-3-3.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical
Documentation
2013-01-21
Mobile dust extractor Serial no.
CTH 26 E/a 496162, 498530,
498531
CTH 48 E/a 496163
Year of CE mark: 2010