Festool CTL MIDI - Manual (Page 13)

CTL MINI/MIDI
13
GB
9 Service and maintenance
Customer service and repair only
through manufacturer or service work-
shops: Please find the nearest address
at:
www.festool.com/Service
Use only original Festool spare parts!
Order No. at:
www.festool.com/Service
 Clean the level sensors [4-1] and empty the dirt
trap [1-9] regularly.
Observe the following instructions:
– The manufacturer or an instructed person must
perform a dust test at least once a year to deter-
mine whether the filter is damaged, the machine is
sealed properly and the monitoring features are
functioning correctly.
– Anything that cannot be cleaned must be discarded
in impermeable bags. Observe applicable disposal
regulations!
9.1 Changing the filter bag
 Open the locking clips and remove the top section
of the machine [3].
 Changing the filter bag - see printing on filter bag.
 Replace the top section of the machine and close
the locking clips.
 A replacement filter bag can be stored in the stor-
age compartment [2-4].
9.2 Changing the filter element
 Open the locking clips and remove the top section
of the machine [3].
 Turn the top section of the machine so that the fil-
ter element is facing upwards (Fig. [4]).
 Fold over the handle [4-2] and remove the holder
[4-3].
 Remove the used filter element [4-4] and replace
with a new one.
 Dispose of the used filter element in accordance
with statutory regulations.
 Replace the holder [4-3] and fold over the handle
[4-2] until it latches into place.
 Replace the top section of the machine and close
the locking clips.
 The order numbers for accessories, filters and
consumables can be found in the Festool cata-
logue or on the internet at www.festool.com.
10 Environment
Do not dispose of the device in house-
hold waste! Recycle devices, accesso-
ries and packaging. Observe applicable
country-specific regulations.
EU only: European Directive 2002/96/EC
stipulates that used electric power tools must be col-
lected separately and disposed of at an environmen-
tally responsible recycling centre.
Information on REACh:www.festool.com/reach
11 EU Declaration of Conformity
We declare under sole responsibility that this product
complies with all the relevant requirements in the fol-
lowing Directives, standards and normative documents:
2006/42/EC, 2004/108/EC, 2011/65/EU, EN 60335-1,
EN 60335-2-69, EN 55014-1, EN 55014-2, EN 61000-
3-2, EN 61000-3-3.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical Docu-
mentation
2013-06-01
WARNING
Risk of injury, electric shock
 Always disconnect the mains plug from the
socket before performing maintenance work on
the machine!
 All maintenance and repair work which requires
the motor housing to be opened must only be
carried out by an authorised service workshop.
NOTE
Motor damage
 Never operate the extractor without a filter ele-
ment fitted as the motor may become damaged.
EKAT
1
2 3 5
4
Mobile dust extractor Serial no.
CTL MINI 499590, 499591, 499592,
499593, 499594
CTL MIDI 499599, 499600, 499601,
499602, 499603
Year of CE mark: 2013