Gembird STR-W1-VF User Manual
Page 6
6
GEMBIRD EUROPE B.V.
All brands and logos are registered trademarks of their respective owners
STR-W1-VF WIRELESS 2.4GHZ STEERING WHEEL WITH
VIBRATION
Wheel Connection
Connect the pedal to the wheel
Insert the receiver cable into PC USB port
Load 4 batteries correctly into the wheel. Slide the power switch to “ON”
The receiver will automatically start connecting to the wheel.
Operate the wheel when receiver connection LED stays lit
Press FC button to designate a certain wheel if the receiver fails to connect a
wheel automatically for more than one wheel gaming. Reviver connection
LED starts blinking fast. Press button 9 and down of D-PAD to start
connecting to the wheel
Note: Do not power on the wheel if the pedals are not connected to the
wheel. Doing that may cause pedal and wings function failures.
Featured Functions
MODE function
Cycle Setup
Digital (LED OFF) Analog (RED LED ON)
3-level Wheel Sensitivity Adjustment
Press button 9 and button 10 at the same time. Hold for 3 seconds until
PROG LED turns orange.
Press button 9 again. Current sensitivity is displayed