Gembird STR-W1-VF User Manual
Page 8
8
GEMBIRD EUROPE B.V.
All brands and logos are registered trademarks of their respective owners
STR-W1-VF WIRELESS 2.4GHZ STEERING WHEEL WITH
VIBRATION
Clear all programs
Press button 9 and button 10 at the same time. Hold for 3 second and
PROG LED turns orange. Release the button.
Press button 10 and hold for 4 seconds. PROG LED is off. All programmed
buttons are cleared. Default is restored.
Note: All the settings will be cleared when the wheel power is cut off
Low Power Mode /Sleep Mode Function (Receiver Connection LED is
blinking)
To save power and prolong battery life, this wheel provides low power mode.
Low power is active in the following situations:
The wheel is powered on without a receiver for 4 minutes
There is no button or axis actions for 3 minutes when connection is done
Press button 10 to wake up from low power mode/ sleep mode. Receiver
connection LED stays lit.
Low Voltage Alarm Function
When batteries are low, PROG LED starts blinking to indicate low voltage.
That means you need to change the batteries or charge the rechargeable
batteries in time. Motor vibration will be automatically shut down
Activate and Deactivate Motor Vibration Function
Motor vibration function is active by default when the wheel is powered on