Edimax Technology BR-6214K - Manual (Page 13)

12
Menu Description
1.1 Dynamic IP Your ISP will automatically give you an IP address
1.2 Static IP Address
Your ISP has given you an IP address already
1.3 PPPoE
Your ISP requires you to use a Point-to-Point Protocol over Ethernet (PPPoE) connection.
1.4 PPTP
Your ISP requires you to use a Point-to-Point Tunneling Protocol (PPTP) connection.
1.5 L2TP Your ISP requires you to use a Layer Two Tunneling Protocol (L2TP) connection.
Click on one of the WAN type and then proceed to the manual’s relevant sub-section (1.1, 1.2, 1.3, 1.4, or 1.5). Click on
Back to return to the previous screen.
1.1 Dynamic IP
Choose Dynamic IP if your ISP will automatically give you an IP address. Some ISP’s may also require that you fill in
additional information such as MAC address (see screen below).
Note: The MAC address section is optional and you can skip this section if your ISP does not require these settings for
you to connect to the Internet.