Edimax Technology BR-6314k - Manual (Page 14)

Saving as below. Click “Next” to continue.
After specify the WAN connection type required by your ISP, please follow the next steps to configure DHCP and DNS
settings to complete the wizard.
Dynamic IP address: Obtain an IP address automatically from your service provider.
Static IP: Use Static IP address to access Network, your ISP will provide a static IP address.
PPPOE: PPPoE is a common connection type used for xDSL.
PPTP: PPP Tunneling Protocol can support multi-protocol Virtual Private Network (VPN)
L2TP: Layer 2 Tunneling Protocol can support multi-protocol Virtual Private Network (VPN)
BigPond: BigPond is an Australian internet service provider and is a subsidiary of Telstra.
3.3 Administrator
3.3.1 Management
Use this page to restrict management access based on a specific password. Passwords can contain from 4-12
alphanumeric characters, and are case sensitive.
Idle Time-out - The amount of time of inactivity before the Broadband Router will automatically close the Administrator
session. Set this to zero to disable it. Default is 300.
Remote Management - By default, management access is only available to users on your local network. However, you
can also manage the Broadband Router from a remote host by adding the IP address of an administrator to this screen.