Edimax Technology BR-6314k - Manual (Page 9)

‧ If you decide to use IP address from Wireless Router, select “Obtain an IP address automatically”.
‧ If you decide to use the IP address you are desired, select “Use the following IP address”. Make sure
enter correct addresses in “IP Address” and “Subnet Mask” fields.
‧ You must set Wireless Router’s IP address as “Default Gateway”.
‧ If the DNS Server fields are empty, select “Use the following DNS server addresses” and enter the
DNS address is provided by your ISP, then click “OK”.
Checking TCP/IP Settings for Windows XP
a) Click “Start”, select “Control Panel Æ Network Connection” and right click “Local Area Connection” then
select “Properties”, window below will appear.