Edimax Technology AR-7267WnB - Manual (Page 4)

3
1. Minimum Requirements
The following devices are required to configure the ADSL2+ Router:
z A PC with an Ethernet Adapter and a Web‐Browser (Internet Explorer 4.0 or higher)
z ADSL Line
z RJ‐45 Ethernet cable and RJ‐11 Phone Line
2. Product Package
This package contains the following components:
„
One ADSL2/2+ Router (Annex A or B)
„ 12V Power Adapter
„ RJ‐45 Ethernet Cable
„ RJ‐11 Telephone Line
„ Quick Installation Guide
„ CD‐ROM (Includes Setup Wizard, Manual and Multi‐Languages Quick Installation Guide)
„ Splitter
Rear Panel
1) Antenna
3 dBi Fixed antenna
2) Reset
The Reset button can be used to restore to factory defaults.
z If problems persisted or you forgot your router’s password, press the reset button for 10
seconds with power on. The router will reset to the factory default settings. (Warning : all your
current settings will be lost and replaced by the factory default settings)
3) WPS
Press the WPS button 5 seconds to activate the wireless protection.
4) Power Jack
Please plug‐in the supplied power adapter to the ADSL Router’s power jack. The power adapter is
12V.