Edimax Technology EK-16RC - Manual (Page 14)

14
6. Hot Key Operation
6.1. Call OSD Menu
Press < Scroll Lock> twice and <Enter>, then the OSD “Main Menu” will be
displayed on the monitor screen. All of the KVM parameters can be setup in
OSD mode. You can also execute some KVM functions in OSD.
<Scroll Lock> → <Scroll Lock> → <Enter>
6.2. Leading Hot Key Select
The two-steps hot key sequence is used for quick function execution.
The leading key is <Scroll Lock> by default. However, you can change the
leading hot key if you want.
By pressing <CTRL> twice, <New Hot Key>, then press <Enter>, you can
change the leading hot key.
The available leading hot key are <Scroll Lock>, < Num Lock > or < Caps
Lock > for option.
¾ Setup leading hot key to < Scroll Lock >
< CTRL > → < CTRL > → < Scroll Lock > → < Enter >
¾ Setup leading hot key to < Num Lock>
< CTRL > → < CTRL > → < Num Lock > → < Enter >
¾ Setup leading hot key to < Caps Lock >
< CTRL > → < CTRL > → < Caps Lock > → < Enter >
Note: You can also change leading hot key by pressing <F1> in OSD main
menu. Please refer section 7.3.5 Setup in OSD – Hot Key.
6.3. Channel Select - Single KVM
6.3.1. Specific channel selection
You can select the connected computers by using the two-step Hot Key
sequence. Press <Scroll Lock> key twice (Step 1), then press key (1 to
16) and <Enter> (step 2) to select the computer you want to control.