Edimax Technology EK-16RC - Manual (Page 17)

17
<Page Up> or <Page Down>, and then press <Enter> to switch to the
target port. Please refer section 7.2.2 Channel select to cascade port.
6.5. Buzzer sound Disable / Enable
Press <Scroll Lock> twice, then <B> and <Enter>. The buzzer sound will be
disabled / enabled alternately. The buzzer sound default setting is ON.
<Scroll Lock> → <Scroll Lock> → <B> → <Enter>
Note: You can also enable/disable buzzer sound by pressing <F1> in OSD
main menu. Please refer section 7.3.6 Setup in OSD - Sound.
.
Figure 13: Buzzer setup hot key
6.6. Auto-Scan Function
When you enable Auto-Scan function by pressing <Scroll Lock> twice, then
<S> and <Enter>. The KVM Switch will shift through all the ports and display
them on the monitor.
The mouse and keyboard will be disabled under this mode. This is necessary to
prevent errors such as erratic movement and wrong characters to display when
using the mouse or keyboard in accident.
6.6.1. Start auto-scan function
<Scroll Lock> → <Scroll Lock> → <S> → <Enter>. The auto-scan
banner will be shown to indicate the scanning channel.