Edimax Technology IC-1510Wg - Manual (Page 6)

The Power port is where you can connect the power adapter.
y LAN
The LAN port is where you can connect the Ethernet network cable.
y WLAN (Antenna Connector)
This round connection is standard Reverse SMA connector where any antennas with
Reverse SMA connector can connect to the Internet Camera.
y Reset
1. If problems occur with your Internet Camera, press the reset button with a
pencil tip (for less than 2 seconds) and the Internet Camera will re-boot
itself, keeping your original configurations.
2. If problems persist or you experience extreme problems or you forgot your
password, press the reset button for longer than 5 seconds and the Internet
Camera will reset itself to the factory default settings (warning: your original
configurations will be replaced with the factory default settings).
Power Jack LAN Port Reset Button
3