Status – Edimax Technology IC-1510Wg User Manual
Page 66
Advertising
Upgrade Firmware
You can upgrade camera’s firmware via this function. Press the
browse button, find the correct firmware and press upgrade.
Reset to Factory Defaults If you want to reset all the camera settings to default, click this
button.
Reboot Device
To reboot the Internet Camera, click “Reboot”.
LED Setting
There are four LEDs to indicate the status of Internet Camera. If
you wan to secure the camera from noticing, you can turn off the
LED light by clicking “LED Light OFF”. To turn on the LED light,
click “LED Light ON”.
8.7.
Status
The “Status” shows the current firmware version, uptime, system time and IP information of
this camera.
63
Advertising