Edimax Technology NS-1500n - Manual (Page 12)

11
3. Plug the power adaptor to the NS-1500n as shown in the setup diagram below.
4. When the Storage LED is steady lit, the NS-1500n is ready.
5. There are two methods to setup the NS-1500n:
(1) Use the Windows-based Storage Server Management Wizard utility to do the basic
setup;
(2) Use the Web-based GUI to do the advanced setup, just go to the next step.
6. The default IP address of the NS-1500n is 192.168.2.5. The PC to setup the NS-1500n
should be in the same subnet as the NS-1500n. If the IP address of your PC is not in
the range of 192.168.2.1~254, please modify the Windows IP address of your PC as
following diagram. If you have used Windows-based Storage Server Wizard utility to
setup the IP of the Storage Server, you can skip this step, because the IP of the
Storage Server and your PC should be in the same subnet now.
Note: If you have to modify the Windows IP address of your PC, please remember the
original Windows IP address settings of your PC. After you finished the whole quick setup
procedure, you have to modify the Windows IP address settings of your PC back to the
original values to make your PC work well.