Edimax Technology IC-3110W - Manual (Page 126)

125
If you want to add a Ediamx network camera on Internet, please click
‘Manually’ button to abort and setup network camera manually
(9) In this page, you can input network camera’s parameters manually
Name: You can define a name for this network camera to help you to
remember the purpose / location of this network camera
Cloud / IP Mode Switch: Click this button to switch operating mode between
Cloud and IP. In cloud mode you have to input Cloud ID**; In IP mode you have
to input IP address or host name of network camera
User Name: Input the user name of network camera. Default user name is
‘admin’
Password: Input the password of network camera. Default user name is ‘1234’
Click ‘Add’ to add a new network camera with parameters listed above.