Edimax Technology IC-3110W - Manual (Page 31)

30
The descriptions of every setting in this menu will be given below:
Item Description
Video Type Specifies video encoding type. Available options
are ‘MPEG4’, ‘MJPEG’, and ‘H.264’. Different
encoding type requires different bandwidth, and
provides different video quality.
Frequency If the place where this Network Camera points to
has a (or more) fluorescent light(s), the image
may look flashing. In this case, you can adjust
this setting to the frequency of electrical power;
this can improve the image quality effectively. If
you don’t know which one you should use, just try
any of them and select one with less flicker.
Flip Mode If you’re not putting this camera on a horizontal
surface but hang the camera on the ceiling or
wall, you can use this function to rotate the
displaying image.
Brightness /
Saturation /
Sharpness
Select brightness, saturation, and sharpness
from dropdown menu, and click ‘ - ' or ‘ + ‘ button
to increase or decrease brightness / saturation /
sharpness setting value. In certain environment,
adjust brightness, saturation, and / or sharpness
will help improve video quality.
Volume Adjust the volume of audio output. Press ‘+’ or
‘-‘ button to increase or decrease volume.
NOTE: When you change any setting(s) listed above, please click ‘Apply’ button
so the change(s) will take effect. For following functions, changes will take effect
right away.
Snapshot Click ‘Snapshot’ button to save the displaying image
as an image file, a message box will appear after
you click ‘Snapshot’ button, showing the filename
and location of saved image file (default filename is
current date and time).
Default directory used to save image file is ‘C:\’, you