Edimax Technology EW-7722UTn - Manual (Page 23)

18
3.1 Utility Overview
There are several parts in the utility screen. Please refer to the following table for the
description.
Parameter Description
Refresh – Refresh adapter list in the “B“ block.
Mode
– There are two modes: Station and Access
Point. If
“Station“ is selected, the adapter works as a
wireless adapter. If
“Access Point“ is selected, the
adapter will works as a wireless AP.
View
– Enable “Status Bar“ and the “D“ block in the
utility will display the current status of the utility.
About
– To check the version of the utility, select this
item.
This is a list for you to configure several adapters in
your PC from the utility.
Show Tray Icon
– To show the icon in the system tray,
select the item.
Disable Adapter
– This function is for you to disable or
enable the adapter.
Windows Zero Config
– To configure the adapter from
A
B
C
D
A
B
C
E